DescriptionMirror - Ø=105mm-Vespa V50, 50N, PV125, ET3, Rally, Sprint, PX, Super, TS125, GT125, GTR125, GL150, SS180 - fits on PX disc with master cylinderChromeleft hand sideComes with under handlebar mount & fittings DescriptionMirrors and mounting kit for mounting the handlebars on classic Vespa scootersThese mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of only 95mm, the optics harmonize perfectly with classic shifting scooters. The length of the mounting arm was dimensioned (250mm) so that a perfect view to the rear is always given. It protrudes only minimally over the lateral contour of the scooter. Thus the practical suitability remains fully maintained, even if it is sometimes tight...STABLE The mounting arm has a stable 10mm diameter. This makes it very low-vibration, which is further enhanced by the small and lighter mirror head. A good view is therefore guaranteed even if the engine vibrates.ADJUSTMENT The mirror adjustment works permanently and pleasantly taut, whereby the mirror always remains in the once adjusted position and does not adjust itself. The adjustment range is pleasantly wide*.Included in the delivery These mirrors are delivered to you ready for installation with an M10 thread including counter and fixing nut. An M10 washer and corrugated washer are also included.VERSIONS The mirror is available in a high-quality chrome plating.MOUNTING A mounting plate for the handlebars is included with the kit.
