DescriptionVespa Crash Bars Florida Side Panel Rear Protector Black PX 125 150 200 LML 2 stroke Description Black rear crash bars with pillion footrests. We can supply a fitting kit if needed. Piaggio in their wisdom moved the 4 number plate mounting holes on later models, this will fit straight on to scooters with 145mm number plate hole spacing, they can be used on models with 100mm hole spacing but will require 2 small holes drilling behind the number plate. Shapely, classic crash bars for the side hoods of all Vespa PX models from 1977. The bars protect the paint and metal perfectly against bumps and falls.At the same time, the front mount offers the passenger a comfortable footrest on the front. Beautifully shaped, classic crash bars for the side panels of all Vespa PX models from 1977 onwards.The bars protect the paintwork and sheet metal perfectly from bumps and falls.At the same time, the front bracket offers the pillion rider a comfortable footrest on the footrest rubbers included in the set. Due to the higher storage area for the feet, the seating position is much more comfortable, especially for somewhat smaller passengers.The brackets consist of four parts:2x bracket (left right)1x front bracket (incl.footrest rubbers)1x bracket at the rearASSEMBLY INSTRUCTIONS The front base is screwed together with the screws of the main stand. To do this, these only need to be loosened slightly, the holder is then threaded in and screwed tight again. The brackets are pushed onto the holder from the side. TIP: The black bracket sets are provided with a high-quality extra thick powder coating. If necessary, slightly sand the area around the footrest rubbers to make the assembly easier to handle. After mounting, the rubbers cover this area completely. The rear holder is fixed with the lower screws of the license plate holder, the crash bars are attached to the side with two M8 nuts.PRACTICAL For inspection and maintenance work, for which the side panels are removed, only the rear M8 nut has to be loosened, the bracket can then simply be folded up/forward.NOTE: To ensure that the brackets remain permanently silent despite vehicle vibrations, they are mounted with a pre-tension. When mounting, it is therefore normal that the brackets at the rear end are very close together and must be pulled apart slightly. Colourmain colour: Black Crash barstube diameter: 22 mmposition: rearmaterial: steel Fits the following vehiclesVespa (Piaggio) P 80 X (V8X1T, -1983) Vespa (Piaggio) PX 80 E FL (V8X1T, 1983-) Vespa (Piaggio) PX 80 E FL Elestart (V8X1T, 1984-1990) Vespa (Piaggio) P 125 X (VNX1T, -1983) Vespa (Piaggio) PX 125 E FL (VNX2T, 1984-1997) Vespa (Piaggio) PX 125 E FL (ZAPM09300, 1998-2000) Vespa (Piaggio) PX 125 E FL (ZAPM09302, 2001-)Vespa (Piaggio) P 150 X (VLX1T, -1980) Vespa (Piaggio) PX 150 E (VLX1T, 1981-1983) Vespa (Piaggio) PX 150 E FL (VLX1T, 1984-1997) Vespa (Piaggio) PX 150 E FL (ZAPM09400, 1998-2000) Vespa (Piaggio) PX 150 E FL (ZAPM09401, 2001-) Vespa (Piaggio) P 200 E (VSX1T, -1980) Vespa (Piaggio) PX 200 E (VSX1T, 1981-1983) Vespa (Piaggio) PX 200 E FL (VSX1T, 1984-1997) Vespa (Piaggio) PX 200 E FL (ZAPM18, 1998-
